2015 Hot Selling New Model 3000W Wind Generator 3 Blades with Tail Turned Brake Protection, CE Approved + 3 Years Warranty
- Model NO.: KSFJ-3000
- Rotating Shaft: Horizontal
- Power: 10-100kW
- Certification: CE, ISO, RoHS
- Rotor Blade Material: Fiber Glass
- Specification: CE, RoHS
- HS Code: 85023100
- Number of Blade: Three Blade
- Stress Way of Blade: Resistance
- Phase: Single-Phase
- Working Wind Speed: 3m/S to 25m/S
- Trademark: Kingsun
- Origin: Nanjing
1) Wind-solar hybrid LED light system;
2) Off grid/on grid wind turbine generator system
3) Wind-solar hybrid generator system;
4) Wind-solar-diesel hybrid generator system;
Start-up at a wind speed of 0.2m/s-0.4m/s and creates power at a wind speed of 1.3m/s-1.8m/s. And the generator without heat.
--- Our turbine is free from an iron core. From a motionless state, its starting torque is three times lower than turbines of different brands.
---Resistance has been reduced to the greatest extend by no cogging effect.
---The turbine's structure is disk.
---The turbines adopts open design with no front/rear end cap, therefore does not produce heat at all. It is ensuring insulating reliability of the coils.
---Multiple-electronic, mechanical braking
---Self-developed national patented technology without any braking devices
---We break the blade element theory principle which has been observed in blade design. The span-wise section and the appearance of the blade has the best aerodynamic performance.
---The apex of the blade is designed to reduce noise. When the vane is rotating at top speed, the noise tested 10 meters away from the blade is only 30db, which is even lower than domestic use electric fans.
Anti-corrosion, sand storm and anti-strike
---The blade uses aviation duralumin molded by high pressure with a specially treated surface which will never rust in various severe environments.
---The blade has a strong hard surface which is 150HB hardness.
Without stalling and the blade is thin & light
---The rotation speed of the blade is faster and it can reach 2200 cycles/minute without stalling.
---Our blade for 600W is only 3mm, the other brand's blade for thickness is 20mm which is 6 times thicker than our blade. And the weight is only 500g, the other brand's blade is 830g which is 40% heavier than our blade.